[. . . ] All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Wiederholen Sie den Schritt Outils nécessaires ATTENTION Tools required CAUTION WARNING: This product contains small items that could be a choking hazard. [. . . ] Carefully screw threaded tube [04] or [05] into ceiling plate until tube either contacts the ceiling or is fully threaded into plate [01]. Insert tube locking screw [19] into plate [01] and tighten securely with hex key [16]. Carefully screw swivel mount [07] onto threaded tube [04] or [05] until hand tight. Position the front of the swivel mount [07] towards the target area then carefully tighten the set screw with hex key [16]. Turn security screw using a Phillips screwdriver until set screw cannot be seen through access hole in swivel mount [07]. Attach projector bracket [06] (with projector) onto swivel mount [07] making certain mounting slots in swivel mount [07] slide under thumb screws and that screws are seated in the back of slots. Insert key into lock and turn to secure projector and projector bracket [06] to swivel mount [07]. English ADJUSTMENTS YAW Adjustment Loosen YAW adjustment locking screw using a #2 Phillips screwdriver. Turn YAW micro-adjustment screw right or left using a #2 Phillips screwdriver until image is properly aligned on target. English ADJUSTMENTS ROLL Adjustment Loosen ROLL adjustment locking screw using a #2 Phillips screwdriver. [. . . ] milestone makes no representation of warranty , expressed or implied , regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]